Enhanced Category 5 Patch Cord [UC-CRD5e ]
Description
Patch cords are now recognized as the most critical element of any high performance cabling system. UNICOM’s Enhanced Category 5 Patch Cords are manufactured from high performance stranded patch cable and RJ45 Plugs. The Plug of patch cord is protected by an anti-snag boot in the same color as the cable sheath and with latch protection. The boot has strain relief to ensure high performance while still being able to be attached to high density switches. The slim boot allows it to use for high density Patch Panels & switches. The flexible latch protector makes it easy to connect/disconnect in high density fully loaded panels.
Features
• Meets EIA/TIA 568-B.2 Enhanced Category 5 standards for transmission up to 100 MHz
• Meets ISO 11801 class D
• High performance
• Slim boot for high density patch panels and switches
• Strain Relief to protect patch cord from radius bend
• Flexible latch protector to ease of connecting/disconnecting
• Backward compatible to Category 3 and 5
• Available in a choice of colors
Specifications
• Contact: Phosphor Bronze Alloy plated with 50 Micron Gold
• Color: Blue, Yellow, Green, Red, Grey
• Cable Wire Gauge: 24 AWG for UTP & 26 AWG for FTP
• Cable type: UTP/FTP, stranded
• Cable Jacket: PVC
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6 Patch Cord [UC-CRD6]
Description
UNICOM’s Category 6 Patch Cord is designed for users that demand the Category 6 network systems like Gigabit Ethernet. UNICOM’s Patch Cords have been developed to create switch and harness links with high quality factory terminated plugs. These Category 6 stranded Core Patch Cords meets EIA/TIA 568-C.2 standard requirements as well as ISO 11801. They are manufactured from high performance stranded patch cable and RJ45 Plugs. The Plug of patch cord is protected by an antisnag boot in the same color as the cable sheath and with latch protection. The boot has strain relief to ensure high performance while still being able to be attached to high density switches. The slim boot allows it to use for high density Patch Panels & switches in Data Centers. The flexible latch protector makes it easy to connect/disconnect in high density fully loaded panels.
Features
• Meets EIA/TIA 568-B.2-1 & 568-C.2 Category 6 standards for transmission up to 250 MHz
• Meets ISO 11801 class E
• High performance
• Slim boot for high density patch panels and switches
• Strain Relief to protect patch cord from radius bend
• Flexible latch protector to ease of connecting/disconnecting
• Backward compatible to Category 3, 5 and 5e
• Available in a choice of colors
• UL Listed
Specifications
• Contact: Phosphor Bronze Alloy plated with 50 Micron Gold
• Color: Blue, Yellow, Green, Red, Grey
• Cable Wire Gauge: 24 AWG for UTP & 26 AWG for FTP
• Cable type: UTP/FTP, stranded
• Cable Jacket: PVC
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6A Patch Cord [UC-CRD6A]
Description
UNICOM’s Category 6A Patch cord is designed for users that demand the Augmented Category 6 network systems like 10G Ethernet. They perform at high-data transfer rates and operate at a minimum frequency of 500MHz. UNICOM’s Patch Cords have been developed to create switch and harness links with high quality factory terminated plugs. These Category 6A stranded Core Patch Cords meets EIA/TIA 568-C.2 standard requirements as well as ISO 11801. They are manufactured from high performance stranded patch cable and RJ45 Plugs. The Plug of patch cord is protected by an anti-snag boot in the same color as the cable sheath and with latch protection. The boot has strain relief to ensure high performance while still being able to be attached to high density switches. The slim boot allows it to use for high density Patch Panels & switches in Data Centers. The flexible latch protector makes it easy to connect/disconnect in high density fully loaded panels.
Features
• Meets EIA/TIA 568-B.2-10 & 568-C.2 Category 6A standards for transmission up to 500 MHz
• Meets IEC 61156-5 & ISO 11801 class EA
• High performance
• Slim boot for high density patch panels and switches
• Strain Relief to protect patch cord from radius bend
• Flexible latch protector to ease of connecting/disconnecting
• Backward compatible to Category 3, 5, 5e and 6
• Available in a choice of colors
• UL Listed
Specifications
• Contact: Phosphor Bronze Alloy plated with 50 Micron Gold
• Color: Blue, Yellow, Green, Red, Grey
• Cable Wire Gauge: 24 AWG for UTP & 26 AWG for FTP
• Cable type: UTP/FTP, stranded
• Cable Jacket: PVC
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6A Shielded Plug [UC-PLG6A-S]
Description
UNICOM’s Category 6A tool-less Shielded Plug does not require the use of a crimping tool. Instead, just simply insert the leads following the color coding and press down the lid for easy installation. A 568B wiring diagram is integrated on the tool-less plug lid for clear installation instruction. This shielded plug is backwards compatible to all lower rated category components, such as Cat5e and 6. The applicable wire gage is 23 to 26AWG and this connector is an IDC (Insulation Displacement Connector) which means there is no need to strip the wire before connecting. Improved shield cover design for easy cable installation and protection from external radiated noise by special solid housing.
Features
• Meets EIA/TIA 568-C.2 Category 6A S-FTP standards for transmission up to 500 MHz
• Meets IEC 60603-7-51 & ISO 11801 class EA
• Easy on-site assembly without any special tools
• Direct Connection by Eliminating Jacks, Face plates, Patch Panels & Patch Cords.
• Protection from external radiated noise
• Backward compatible to Category 3, 5, 5e and 6
Specifications
• Enclosure: Zinc-Alloy fully shielded
• Contact Pin: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 23~26 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 8 Shielded Plug [UC-PLG8-S]
Description
UNICOM’s Category 8 Shielded plug is a secure, highend
structured cabling system designed for mission-critical
25/40GBASE-T applications with data center channel
configurations from 9 to 30 meters. This tool-less Shielded Plug
does not require the use of a crimping tool. Instead, just simply
insert the leads following the color coding and press down the
lid for easy installation. A 568B wiring diagram is integrated on
the tool-less plug lid for clear installation instruction. This shielded
plug is backwards compatible to all lower rated category
components, such as Cat5e, 6 and 6A. The applicable wire
gage is 22 to 26AWG and this connector is an IDC (Insulation
Displacement Connector) which means there is no need to
strip the wire before connecting. The improved shield cover
is for easy cable installation and protection from external
radiated noise by special solid housing.
Features
• Meets EIA/TIA 568-C.2 Category 8 S-FTP standards for transmission up to 2000 MHz
• Meets ISO/IEC TR 11801-9901 Class I
• Supports IEEE 802.3af PoE and IEEE 802.3at PoE+ applications
• Easy on-site assembly without any special tools
• Direct Connection by Eliminating Jacks, Face plates, Patch Panels & Patch Cords
• Protection from external radiated noise
• Backward compatible to Category 3, 5, 5e ,6 and 6A
Specifications
• Enclosure: Zinc-Alloy fully shielded
• Contact Pin: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~26 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Enhanced Category 5 Jack [UC-JCK5e]
Description
UNICOM’s Category 5e Jacks, also referred to as modular jacks, are used with the standard European/US face plates and Surface Mount box and can be used with UNICOM’s unloaded Patch Panels as well. This series is designed for users that demand the latest Category 5e network system. UNICOM introduces enhanced Category 5 jack characterized using Power Sum crosstalk electrical performance parameters which some system of full duplex are operated over four pairs. These electrical characteristics include Power-Sum NEXT, Power-Sum ACR, etc. Enhanced Category 5 Jack also features reduced attenuation, pair to pair NEXT margin over category 5 standards. Vertical design for easy access on patch panel from back & compact design for installing on high density patch panels and slim back boxes, makes it a unique user friendly Jack. Wire Cap reduces dust & risk of wire losing to have long life high quality performance.
Features
• Meets EIA/TIA 568-B.2 Category 5e UTP standards for transmission up to 100 MHz
• Meets ISO 11801 class D
• Compact design to install on high density patch panels
• Fits in all UNICOM’s Face plates, SMB and unloaded patch panels
• Minimum depth to be fitted into thin back boxes
• 180 Degree design for easy termination on installed patch panel
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3 and 5
• UL Listed
Specifications
• Enclosure: High Impact, Flame retardant plastic, UL 94V-0
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Enhanced Category 5 Shielded Jack [UC-JCK5e-S]
Description
UNICOM’s Category 5e Shielded Jacks, also referred to as modular jacks, are used with the standard European/US face plates and Surface Mount box and can be used with UNICOM’s unloaded Shielded Patch Panels as well. This series is designed for users that demand the latest Category 5e network system. Vertical design for easy access on patch panel from back & compact design for installing on high density patch panels and slim back boxes, makes it a unique user friendly Jack. Wire Cap reduces dust & risk of wire losing to have long life high quality performance. Improved shield cover design for easy cable installation and protection from external radiated noise.
Features
• Meets EIA/TIA 568-B.2 Category 5e S-FTP standards for transmission up to 100 MHz
• Meets ISO 11801 class D
• Protection from external radiated noise
• Compact design to install on high density patch panels
• Fits in all UNICOM’s Face plates, SMB and unloaded patch panels
• Minimum depth to be fitted into thin back boxes
• 180 Degree design for easy termination on installed patch panel
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to shielded Category 3 and 5
Specifications
• Enclosure: Zinc-Alloy fully shielded
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Enhanced Category 5 Angled Jack [UC-JCK5e-A]
Description
UNICOM’s Angled Jacks are designed to increase the available space between the front of the patch panel and cabinet doors. The angled jack positions eliminate the need for an additional cable management panel, while maintaining optimised patch cord bend radius. The special unloaded angled patch panel should be chosen for this type of jack. UNICOM introduces enhanced Category 5 jack characterized using Power Sum crosstalk electrical performance parameters which some system of full duplex are operated over four pairs. These electrical characteristics include Power-Sum NEXT, Power-Sum ACR, etc. Enhanced Category 5 Jack also features reduced attenuation, pair to pair NEXT margin over category 5 standards. Vertical design for easy access on patch panel from back and Wire Cap reduces dust & risk of wire losing to have long life high quality performance.
Features
• Meets EIA/TIA 568-B.2 Category 5e UTP standards for transmission up to 100 MHz
• Meets ISO 11801 class D
• Angled design to eliminate the need for an additional cable management panel
• Reduce the patch cord bend radius
• Fits in UNICOM’s special unloaded angled patch panels
• 180 Degree design for easy termination on installed patch panel
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3 and 5
• UL Listed
Specifications
• Enclosure: High Impact, Flame retardant plastic, UL 94V-0
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Enhanced Category 5 Angled Shielded Jack [UC-JCK5e-AS]
Description
UNICOM’s Angled Shielded Jack are designed to increase the available space between the front of the patch panel and cabinet doors. The angled jack positions eliminate the need for an additional cable management panel, while maintaining optimised patch cord bend radius. The special unloaded angled patch panel should be chosen for this type of jack. Vertical design for easy access on patch panel from back and Wire Cap reduces dust & risk of wire losing to have long life high quality performance. Improved shield cover design for easy cable installation and protection from external radiated noise.
Features
• Meets EIA/TIA 568-B.2 Category 5e S-FTP standards for transmission up to 100 MHz
• Meets ISO 11801 class D
• Protection from external radiated noise
• Angled design to eliminate the need for an additional cable management panel
• Reduce the patch cord bend radius
• Fits in UNICOM’s special unloaded angled patch panels
• 180 Degree design for easy termination on installed patch panel
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3 and 5
Specifications
• Enclosure: Zinc-Alloy fully shielded
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6 Jack [UC-JCK6]
Description
UNICOM’s Category 6 Jack is designed for users that demand the Category 6 network systems like Gigabit Ethernet. Choosing a cabling infrastructure performance that can meet tomorrow’s high speed applications is very important. Category 6 Keystone Jack also features reduced attenuation, pair to pair NEXT margin over Category 6 standard is comprised of EIA/TIA- 568-A, EIA/TIA 568-B and ANSI/TIA-568-C.2 standard. UNICOM’s Category 6 jacks are used with the standard European/French/US face plates and Surface Mount box and can be used with UNICOM’s unloaded Patch Panels as well. Vertical design for easy access on patch panel from back & compact design for installing on high density patch panels and slim back boxes, makes it a unique user friendly Jack. Wire Cap reduces dust & risk of wire losing to have long life high quality performance.
Features
• Meets EIA/TIA 568-B.2-1 Category 6 UTP standards for transmission up to 250 MHz
• Meets ISO 11801 class E
• Compact design to install on high density patch panels
• Fits in all UNICOM’s Face plates, SMB and unloaded patch panels
• Minimum depth to be fitted into thin back boxes
• 180 Degree design for easy termination on installed patch panel
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5 and 5e
• UL Listed
Specifications
• Enclosure: High Impact, Flame retardant plastic, UL 94V-0
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6 Shielded Jack [UC-JCK6-S]
Description
UNICOM’s Category 6 Shielded Jack is designed for users that demand the Category 6 network systems like Gigabit Ethernet which needs to protect from external radiated noise. Choosing a cabling infrastructure performance that can meet tomorrow’s high speed applications is very important. Category 6 Keystone Jack also features reduced attenuation, pair to pair NEXT margin over Category 6 standard is comprised of EIA/TIA-568-A, EIA/TIA 568-B and ANSI/TIA-568-C.2 standard. UNICOM’s Category 6 jacks are used with the standard European/French/US face plates and Surface Mount box and can be used with UNICOM’s unloaded Patch Panels as well. Vertical design for easy access on patch panel from back & compact design for installing on high density patch panels and slim back boxes, makes it a unique user friendly Jack. Wire Cap reduces dust & risk of wire losing to have long life high quality performance. Improved shield cover design for easy cable installation and protection from external radiated noise.
Features
• Meets EIA/TIA 568-B.2-1 Category 6 S-FTP standards for transmission up to 250 MHz
• Meets ISO 11801 class E
• Protection from external radiated noise
• Compact design to install on high density patch panels
• Fits in all UNICOM’s Face plates, SMB and unloaded patch panels
• Minimum depth to be fitted into thin back boxes
• 180 Degree design for easy termination on installed patch panel
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5 and 5e
Specifications
• Enclosure: Zinc-Alloy fully shielded
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6 Angled Jack [UC-JCK6-A]
Description
UNICOM’s Category 6 Angled Jack is designed for users that demand the Category 6 network systems like Gigabit Ethernet. Choosing a cabling infrastructure performance that can meet tomorrow’s high speed applications is very important. Category 6 Keystone Jack also features reduced attenuation, pair to pair NEXT margin over Category 6 standard is comprised of EIA/TIA-568-A, EIA/TIA 568-B and ANSI/TIA-568-C.2 standard. UNICOM’s Angled jack are designed to increase the available space between the front of the patch panel and cabinet doors. The angled jack positions eliminate the need for an additional cable management panel, while maintaining optimised patch cord bend radius. The special unloaded angled patch panel should be chosen for this type of jack. Vertical design for easy access on patch panel from back and Wire Cap reduces dust & risk of wire losing to have long life high quality performance.
Features
• Meets EIA/TIA 568-B.2-1 Category 6 UTP standards for transmission up to 250 MHz
• Meets ISO 11801 class E
• Angled design to eliminate the need for an additional cable management panel
• Reduce the patch cord bend radius
• Fits in UNICOM’s special unloaded angled patch panels
• 180 Degree design for easy termination on installed patch panel
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5 and 5e
• UL Listed
Specifications
• Enclosure: High Impact, Flame retardant plastic, UL 94V-0
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6 Angled Shielded Jack [UC-JCK6-AS]
Description
UNICOM’s Category 6 Angled Shielded Jack is designed for users that demand the Category 6 network systems like Gigabit Ethernet. Choosing a cabling infrastructure performance that can meet tomorrow’s high speed applications is very important. Category 6 Keystone Jack also features reduced attenuation, pair to pair NEXT margin over Category 6 standard is comprised of EIA/TIA-568-A, EIA/TIA 568-B and ANSI/TIA-568-C.2 standard. UNICOM’s Angled Shielded jack are designed to increase the available space between the front of the patch panel and cabinet doors. The angled jack positions eliminate the need for an additional cable management panel, while maintaining optimised patch cord bend radius. The special unloaded angled patch panel should be chosen for this type of jack. Vertical design for easy access on patch panel from back and Wire Cap reduces dust & risk of wire losing to have long life high quality performance.
Features
• Meets EIA/TIA 568-B.2-1 Category 6 S-FTP standards for transmission up to 250 MHz
• Meets ISO 11801 class E
• Protection from external radiated noise
• Angled design to eliminate the need for an additional cable management panel
• Reduce the patch cord bend radius
• Fits in UNICOM’s special unloaded angled patch panels
• 180 Degree design for easy termination on installed patch panel
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5 and 5e
Specifications
• Enclosure: Zinc-Alloy fully shielded
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6A Jack [UC-JCK6A]
Description
UNICOM’s Category 6A Jack is designed for users that demand the Augmented Category 6 network systems like 10G Ethernet. They perform at high-data transfer rates and operate at a minimum frequency of 500MHz. CAT6A is completely backward-compatible with current CAT6 equipment. UNICOM now offers the elevated performance of quad reactance, minimizing internal crosstalk and reducing the injection of common mode noise, a significant source of alien crosstalk. The Jacks Meet TIA 568.2-10 & 568C.2 Augmented Category 6 component specifications and beyond. UNICOM’s Category 6A jacks are used with the standard European/French/US face plates and Surface Mount box and can be used with UNICOM’s unloaded Patch Panels as well. Vertical design for easy access on patch panel from back & compact design for installing on high density patch panels and slim back boxes, makes it a unique user friendly Jack. Wire Cap reduces dust & risk of wire losing to have long life high quality performance.
Features
• Meets EIA/TIA 568-C.2 Category 6A UTP standards for transmission up to 500 MHz
• Meets IEC 60603-7-51 & ISO 11801 class EA
• Compact design to install on high density patch panels
• Fits in all UNICOM’s Face plates, SMB and unloaded patch panels
• Minimum depth to be fitted into thin back boxes
• 180 Degree design for easy termination on installed patch panel
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5, 5e and 6
• UL Listed
Specifications
• Enclosure: High Impact, Flame retardant plastic, UL 94V-0
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6A Shielded Jack [UC-JCK6A-S]
Description
UNICOM’s Category 6A Shielded Keystone Jack is designed for users that demand the Augmented Category 6 network systems like 10G Ethernet. They perform at high-data transfer rates and operate at a minimum frequency of 500MHz. CAT6A is completely backward-compatible with current CAT6 equipment. UNICOM now offers the elevated performance of quad reactance, minimizing internal crosstalk and reducing the injection of common mode noise, a significant source of alien crosstalk. The Jacks Meet TIA 568.2-10 & 568C.2 Augmented Category 6 component specifications and beyond. UNICOM’s Category 6 jacks are used with the standard European/French/US face plates and Surface Mount box and can be used with UNICOM’s unloaded Patch Panels as well. Vertical design for easy access on patch panel from back & compact design for installing on high density patch panels and slim back boxes, makes it a unique user friendly Jack. Wire Cap reduces dust & risk of wire losing to have long life high quality performance. Improved shield cover design for easy cable installation and protection from external radiated noise.
Features
• Meets EIA/TIA 568-C.2 Category 6A S-FTP standards for transmission up to 500 MHz
• Meets IEC 60603-7-51 & ISO 11801 class EA
• Protection from external radiated noise
• Compact design to install on high density patch panels
• Fits in all UNICOM’s Face plates, SMB and unloaded patch panels
• Minimum depth to be fitted into thin back boxes
• 180 Degree design for easy termination on installed patch panel
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5, 5e and 6
Specifications
• Enclosure: Zinc-Alloy fully shielded
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6A Angled Jack [UC-JCK6A-A]
Description
UNICOM’s Category 6A Angled Jack is designed for users that demand the Augmented Category 6 network systems like 10G Ethernet. They perform at high-data transfer rates and operate at a minimum frequency of 500MHz. CAT6A is completely backward-compatible with current CAT6 equipment. UNICOM now offers the elevated performance of quad reactance, minimizing internal crosstalk and reducing the injection of common mode noise, a significant source of alien crosstalk. The Jacks Meet TIA 568.2-10 & 568C.2 Augmented Category 6 component specifications and beyond. UNICOM’s Angled jack are designed to increase the available space between the front of the patch panel and cabinet doors. The angled jack positions eliminate the need for an additional cable management panel, while maintaining optimised patch cord bend radius. The special unloaded angled patch panel should be chosen for this type of jack. Vertical design for easy access on patch panel from back and Wire Cap reduces dust & risk of wire losing to have long life high quality performance.
Features
• Meets EIA/TIA 568-C.2 Category 6A UTP standards for transmission up to 500 MHz
• Meets IEC 60603-7-51 & ISO 11801 class EA
• Angled design to eliminate the need for an additional cable management panel
• Reduce the patch cord bend radius
• Fits in UNICOM’s special unloaded angled patch panels
• 180 Degree design for easy termination on installed patch panel
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5, 5e and 6
• UL Listed
Specifications
• Enclosure: High Impact, Flame retardant plastic, UL 94V-0
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6A Angled Shielded Jack [UC-JCK6A-AS]
Description
UNICOM’s Category 6A Angled Shielded Jack is designed for users that demand the Augmented Category 6 network systems like 10G Ethernet. They perform at high-data transfer rates and operate at a minimum frequency of 500MHz. CAT6A is completely backward-compatible with current CAT6 equipment. UNICOM now offers the elevated performance of quad reactance, minimizing internal crosstalk and reducing the injection of common mode noise, a significant source of alien crosstalk. The Jacks Meet TIA 568.2-10 & 568C.2 Augmented Category 6 component specifications and beyond. UNICOM’s Angled Shielded jack are designed to increase the available space between the front of the patch panel and cabinet doors. The angled jack positions eliminate the need for an additional cable management panel, while maintaining optimised patch cord bend radius. The special unloaded angled patch panel should be chosen for this type of jack. Vertical design for easy access on patch panel from back and Wire Cap reduces dust & risk of wire losing to have long life high quality performance. Improved shield cover design for easy cable installation and protection from external radiated noise.
Features
• Meets EIA/TIA 568-C.2 Category 6A S-FTP standards for transmission up to 500 MHz
• Meets IEC 60603-7-51 & ISO 11801 class EA
• Protection from external radiated noise
• Angled design to eliminate the need for an additional cable management panel
• Reduce the patch cord bend radius
• Fits in UNICOM’s special unloaded angled patch panels
• 180 Degree design for easy termination on installed patch panel
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5, 5e and 6
Specifications
• Enclosure: Zinc-Alloy fully shielded
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 8 Shielded Jack [UC-JCK8-S]
Description
UNICOM’s Category 8 Shielded Jack allows you to transport
data up to four times faster on the same type of Jacks already
being used like Category 6A. It is a secure, high-end structured
cabling system designed for mission-critical 25/40GBASE-T
applications with data center channel configurations from
9 to 30 meters. It is targeted for data center switch-to-server
interconnections and is designed for applications up to 2000
MHz. It provides transmission performance meeting Category 8
specifications but it is backwards compatible to all lower rated
category components, such as Cat5e, 6 and 6A. The improved
shield cover is for easy cable installation and protection from
external radiated noise by special solid housing.
Features
• Meets EIA/TIA 568-C.2 Category 8 S-FTP standards for transmission up to 2000 MHz
• Meets ISO/IEC TR 11801-9901 Class I
• Supports IEEE 802.3af PoE and IEEE 802.3at PoE+ applications
• Protection from external radiated noise
• Compact design to install on high density patch panels
• Fits in all UNICOM’s Face plates, SMB and unloaded patch panels
• Minimum depth to be fitted into thin back boxes
• 180 Degree design for easy termination on installed patch panel
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5, 5e, 6 and 6A
Specifications
• Enclosure: Zinc-Alloy fully shielded
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Quick Punching Tool [UC-TOL-PNC1]
Description
The termination process is now simpler and faster with UNICOM’s quick punching tool. This Punching tool makes the punch process and wire cutting simultaneously so saving greater time when terminating cable. This secured termination owes to special guide/module for 8 wire cutting & punching at the same time.
UNICOM’s quick punching tool allows for effortless termination of Keystone Jack connections so that reduces installer fatigue and improves connection quality. When the punching guide is well-worn, you can replace the module with spare easily. There is a latch to lock the handle for saving space in toolbox and keep the guide safe.
Features
• Suitable for quick and secured termination of UNICOM’s slim Jacks
• 8 times faster than individual punching
• Punching & cutting extra wires simultaneously
• Saves punching time & reduces installer fatigue
• Improves connection quality
• Includes one spare of Punching/cutting Guide
• Easy Replacing the Guide with spare
• Special latch to lock the Handle while not using
• Heavy Duty Body
Specifications
• Body: Aluminium Alloy
• Frame: Nylon PA66+15%GF
• Latch/Cover: PP
• Color: Blue
• Size: 5.90” x 6.30”
Category 6 Inline Coupler [UC-INL6]
Description
UNICOM’s Category 6 Inline Coupler is ideal for the extension of existing cabling installations, offering a straight through RJ45 to RJ45 connection whilst maintaining Category 6 performance. This Category 6 Inline Coupler offers a practical, cost-effective solution for joining two RJ45-terminated cables together to form one long cable.
This product is ideal for use in the open office, flexible workplaces or environments where there is a predisposition to frequently modify work station layouts. Many of these layouts use raised floor or other open pathway designs to provide flexibility and allow easy access to cabling for moves, adds or changes (MAC), so the inline coupler offers a better time saving approach for initial installations and future MAC work.
Features
• Meets EIA/TIA 568-B.2-1 Category 6 UTP standards for transmission up to 250 MHz
• Meets ISO 11801 class E
• Easy way to extending cables
• Fast way to fix the shortened cables
• Could be installed on unloaded Patch Panels
• Eliminates Keystone Jacks by female-female connection
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5 and 5e
• UL Listed
Specifications
• Enclosure: High Impact, Flame retardant plastic, UL 94V-0
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6A Shielded Inline Coupler [UC-INL6A-S]
Description
UNICOM’s Category 6A Shielded Inline Coupler is designed for users that demand the Augmented Category 6 network systems like 10G Ethernet. They perform at high-data transfer rates and operate at a minimum frequency of 500MHz. UNICOM’s Augmented Category 6 Inline Coupler is ideal for the extension of existing cabling installations, offering a straight through RJ45 to RJ45 connection whilst maintaining Category 6A performance. This Category 6A Shielded Inline Coupler offers a practical, costeffective solution for joining two RJ45-terminated cables together to form one long cable. This product is ideal for use in the open office, flexible workplaces or environments where there is a predisposition to frequently modify work station layouts. Many of these layouts use raised floor or other open pathway designs to provide flexibility and allow easy access to cabling for moves, adds or changes (MAC), so the inline coupler offers a better time saving approach for initial installations and future MAC work. Improved shield cover design for easy cable installation and protection from external radiated noise.
Features
• Meets EIA/TIA 568-C.2 Category 6A S-FTP standards for transmission up to 500 MHz
• Meets IEC 60603-7-51 & ISO 11801 class EA
• Protection from external radiated noise
• Flexible approach to reconfigurable open office cabling
• Easy way to extending cables
• Fast way to fix the shortened cables
• Could be installed on unloaded Patch Panels
• Eliminates Keystone Jacks by female-female connection
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5, 5e and 6
Specifications
• Enclosure: Zinc-Alloy fully shielded
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6A Angled Shielded Inline Coupler [UC-INL6A-AS]
Description
UNICOM’s Category 6A Shielded Inline Coupler is designed for users that demand the Augmented Category 6 network systems like 10G Ethernet. They perform at high-data transfer rates and operate at a minimum frequency of 500MHz. UNICOM’s Augmented Category 6 Inline Coupler is ideal for the extension of existing cabling installations, offering a straight through RJ45 to RJ45 connection whilst maintaining Category 6A performance. This Category 6A Shielded Inline Coupler offers a practical, cost-effective solution for joining two Horizontal & Vertical RJ45-terminated cables together or corner connections.
This product is ideal for use in the open office, flexible workplaces or environments where there is a predisposition to frequently modify work station layouts. Many of these layouts use raised floor or other open pathway designs to provide flexibility and allow easy access to cabling for moves, adds or changes (MAC), so the inline coupler offers a better time saving approach for initial installations and future MAC work. Improved shield cover design for easy cable installation and protection from external radiated noise. 90 Degree Angled design reduces patch cord bend radius while using on Patch Panels.
Features
• Meets EIA/TIA 568-C.2 Category 6A S-FTP standards for transmission up to 500 MHz
• Meets IEC 60603-7-51 & ISO 11801 class EA
• Protection from external radiated noise
• Reduce the patch cord bend radius
• Ideal for Horizontal & Vertical cable joint or corner connections
• Flexible approach to reconfigurable open office cabling
• Easy way to extending cables
• Fast way to fix the shortened cables
• Could be installed on unloaded Patch Panels
• Eliminates Keystone Jacks by female-female connection
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5, 5e and 6
Specifications
• Enclosure: Zinc-Alloy fully shielded
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Shuttered European Face Plate [UC-PLT-SH]
Description
UNICOM’s Shuttered Angled French Face Plate takes the worry out of over bending the data cable when fixing the plate to the wall, while still maintaining a clean and professional appearance. It provides sufficient space for larger diameter cables to bend properly within pathways. The Angled design make the pluggedin patch cords occupy less space than the other types of face plates and prevents patch cords from radius bend. The bezel/ adapter of face plate can also fit over the French type trunks so you can keep end-to-end solutions even using French standard Trunking systems. UNICOM’s Shuttered Angled Face Plate provides a quick snap in/out feature that enables you to change or add Jacks easily to meet any system requirement, improving the efficiency of onsite installations and maintenance. UNICOM’s Shuttered Angled face plate accepts Shielded and Unshielded Modular Jacks. This face plate is available in both single & dual gang for multipurpose usage. Each Bezel protected by a shutter to prevent from dust and dirt while patch cords is not connected. Faceplate features top designation icon area for convenient faceplate identification. Faceplate is supplied with label cards and clear icon labeling window covers. The faceplate can be attached to standard electrical boxes or standard French type mounting boxes.
Features
• Shuttered slim design
• Protected by Shutter to prevent from dust and dirt
• Dual gang supports 1 or 2 Jacks
• Each gang features two icon areas for port identification
• Large multi-purpose icon area
• Sharp edge for more beauty
• Changeable Bezel/Adapter to fit over British Trunks
• Supports both unshielded & shielded Jacks
• UL approved
Specifications
• Plate Material: High Impact, Flame retardant plastic, UL 94V-0
• Color: White, Beige
• Size: 3.38” x 3.38”
• Mounting box depth: 1.4”
• Interface: Optional RJ non-angled Jacks
Shuttered Angled French Face Plate [UC-PLT-SA]
Description
UNICOM’s Shuttered Angled French Face Plate takes the worry out of over bending the data cable when fixing the plate to the wall, while still maintaining a clean and professional appearance. It provides sufficient space for larger diameter cables to bend properly within pathways. The Angled design make the pluggedin patch cords occupy less space than the other types of face plates and prevents patch cords from radius bend. The bezel/ adapter of face plate can also fit over the French type trunks so you can keep end-to-end solutions even using French standard Trunking systems. UNICOM’s Shuttered Angled Face Plate provides a quick snap in/out feature that enables you to change or add Jacks easily to meet any system requirement, improving the efficiency of onsite installations and maintenance. UNICOM’s Shuttered Angled face plate accepts Shielded and Unshielded Modular Jacks. This face plate is available in both single & dual gang for multipurpose usage. Each Bezel protected by a shutter to prevent from dust and dirt while patch cords is not connected. Faceplate features top designation icon area for convenient faceplate identification. Faceplate is supplied with label cards and clear icon labeling window covers. The faceplate can be attached to standard electrical boxes or standard French type mounting boxes.
Features
• Shuttered & Angled design
• Sufficient space for larger diameter cables to bend at back
• Prevents patch cords from radius bend
• Protected by Shutter to prevent from dust and dirt
• Dual gang supports 1 or 2 Jacks
• Each gang features two icon areas for port identification
• Large multi-purpose icon area
• Curved edge on top & bottom of Frame
• Standard Bezel/Adapter to fit over the French Trunks
• Supports both unshielded & shielded Jacks
• UL approved
Specifications
• Plate Material: High Impact, Flame retardant plastic, UL 94V-0
• Color: White, Beige
• Size: 3.38” x 3.38”
• Interface: Optional RJ non-angled Jacks
Shuttered Surface Mount Box [UC-SMB-SH]
Description
UNICOM’s Surface Mount Box provides a quick snap in/out feature that enables you to change or add Jacks easily to meet any system requirement, improving the efficiency of on-site installations and maintenance. These surface mount box accepts Shielded and Unshielded Modular Jacks. UNICOM’s Shuttered SMB protected by a shutter to prevent from dust and dirt while patch cords is not connected. SMB features top designation icon area for convenient SMB identification. SMB is supplied with label cards and clear icon labeling window covers. These shuttered SMB can be installed in desk clusters, beneath retail counters, under floors, or wall mounted, they are also ideal for temporary or emergency installations.
Features
• Compact Design
• Sufficient space for larger diameter cables
• Protected by Shutter to prevent from dust and dirt
• 2 icon areas for port identification
• Supports both unshielded & shielded Jacks
• UL approved
Specifications
• Plate Material: High Impact, Flame retardant plastic, UL 94V-0
• Color: White, Beige
• Size: 0.98”(D) x 1.77”(W) x 2.56”(L)
• Interface: Optional RJ non-angled Jacks
Category 6 Patch Panel [UC-PNL6]
Description
To have a fast moving, economic and user friendly patch panel, UNICOM has upgraded the traditional patch panel to new one with built-in cable management. The ring type built-in cable management eliminates the need for an additional cable management panel. In addition to port-number identification, the panel has an icon area to have more information about each port/user. This type of panel is available only in one model as economic, user-friendly patch panel but it is backward compatible to CAT-5e for sure. UNICOM’s Category 6 Patch Panel is designed for users that demand the Category 6 network systems like Gigabit Ethernet. Category 6 Patch Panel also features reduced attenuation, pair to pair NEXT margin over Category 6 standard is comprised of EIA/TIA-568-A, EIA/TIA 568-B and ANSI/TIA-568-C.2 standard. A rear cable management tray with purposely designed cable tie positions, is supplied with each panel which is fitted by simply snapping it into place without the need for any tools. This cable management tray is a good support bar which is capable of fixing cables in a substantially horizontal position even when supporting a large number of network cables, so it helps to have secured termination to the patch panel. It also allows the users to maintain a proper bend radius of horizontal cables.
Features
• Meets EIA/TIA 568-B.2-1 Category 6 UTP standards for transmission up to 250 MHz
• Meets ISO 11801 class E
• Supply with front Ring as Built-in cable Management
• Supply with Cable management tray/support bar
• Port number identification
• Icon area for each port
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5 and 5e
• UL Listed
Specifications
• Plate Material: Iron
• Color: Black Powder coating painting
• Size: 1U for 24 Ports
• Jack Enclosure: High Impact, Flame retardant plastic, UL 94V-0
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Enhanced Category 5 High Density Patch Panel [UC-PNL5e-H]
Description
UNICOM introduces enhanced Category 5 Patch Panels characterized using Power Sum crosstalk electrical performance parameters which some system of full duplex are operated over four pairs. These electrical characteristics include Power-Sum NEXT, Power-Sum ACR, etc. Enhanced Category 5 Patch Panel also features reduced attenuation, pair to pair NEXT margin over category 5 standards. 24 Ports 0.5U & 48 Ports 1U as high density design makes it the best choice for any Racks with limited space. The PCB design provides a high performance inter-connection link. Each PCB installed on a special tray for less punching & maintenance time. Port’s number silk print is easy for identification and maintenance.
A rear cable management tray with purposely designed cable tie positions, is supplied with each panel which is fitted by simply snapping it into place without the need for any tools. This cable management tray is a good support bar which is capable of fixing cables in a substantially horizontal position even when supporting a large number of network cables, so it helps to have secured termination to the patch panel. It also allows the users to maintain a proper bend radius of horizontal cables.
Features
• Meets EIA/TIA 568-B.2 Category 5e UTP standards for transmission up to 100 MHz
• Meets ISO 11801 class D
• High density design for data center usage
• Supply with Cable management tray/support bar
• Port number identification
• High performance by aid of PCB inter-connection link
• Special Tray for easy access to PCB and connection points
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3 and 5
• UL Listed
Specifications
• Plate Material: Iron
• Color: Black Powder coating painting
• Size: Half U for 24 & 1U for 48 Ports
• Jack Enclosure: High Impact, Flame retardant plastic, UL 94V-0
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Enhanced Category 5 High Density Shielded Patch Panel [UC-PNL5e-HS]
Description
UNICOM introduces enhanced Category 5 Patch Panels characterized using Power Sum crosstalk electrical performance parameters which some system of full duplex are operated over four pairs. These electrical characteristics include Power-Sum NEXT, Power-Sum ACR, etc. Enhanced Category 5 Patch Panel also features reduced attenuation, pair to pair NEXT margin over category 5 standards. 24 Ports 0.5U & 48 Ports 1U as high density design makes it the best choice for any Racks with limited space. The PCB design provides a high performance inter-connection link. Each PCB installed on a special tray for less punching & maintenance time. Port’s number silk print is easy for identification and maintenance. Improved shield design is for protecting from external radiated noise so this product is recommended for industrial areas as well.
A rear cable management tray with purposely designed cable tie positions, is supplied with each panel which is fitted by simply snapping it into place without the need for any tools. This cable management tray is a good support bar which is capable of fixing cables in a substantially horizontal position even when supporting a large number of network cables, so it helps to have secured termination to the patch panel. It also allows the users to maintain a proper bend radius of horizontal cables.
Features
• Meets EIA/TIA 568-B.2 Category 5e S-FTP standards for transmission up to 100 MHz
• Meets ISO 11801 class D
• High density design for data center usage
• Protection from external radiated noise
• Supply with ground lug & ground wire
• Supply with Cable management tray/support bar
• Port number identification
• High performance by aid of PCB inter-connection link
• Special Tray for easy access to PCB and connection points
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3 and 5
• UL Listed
Specifications
• Plate Material: Galvanized Steel
• Color: Sliver
• Size: Half U for 24 & 1U for 48 Ports
• Jack Enclosure: High Impact, Flame retardant plastic, UL 94V-0
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6 High Density Patch Panel [UC-PNL6-H]
UNICOM’s Category 6 Patch Panel is designed for users that demand the Category 6 network systems like Gigabit Ethernet. Choosing a cabling infrastructure performance that can meet tomorrow’s high speed applications is very important. Category 6 Patch Panel also features reduced attenuation, pair to pair NEXT margin over Category 6 standard is comprised of EIA/ TIA-568-A, EIA/TIA 568-B and ANSI/TIA-568-C.2 standard. 24 Ports 0.5U & 48 Ports 1U as high density design makes it the best choice for data center applications. The PCB design provides a high performance inter-connection link. Each PCB installed on a special tray for less punching & maintenance time. Port’s number silk print is easy for identification and maintenance.
A rear cable management tray with purposely designed cable tie positions, is supplied with each panel which is fitted by simply snapping it into place without the need for any tools. This cable management tray is a good support bar which is capable of fixing cables in a substantially horizontal position even when supporting a large number of network cables, so it helps to have secured termination to the patch panel. It also allows the users to maintain a proper bend radius of horizontal cables.
Features
• Meets EIA/TIA 568-B.2-1 Category 6 UTP standards for transmission up to 250 MHz
• Meets ISO 11801 class E
• High density design for data center usage
• Supply with Cable management tray/support bar
• Port number identification
• High performance by aid of PCB inter-connection link
• Special Tray for easy access to PCB and connection points
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5 and 5e
• UL Listed
Specifications
• Plate Material: Iron
• Color: Black Powder coating painting
• Size: Half U for 24 & 1U for 48 Ports
• Jack Enclosure: High Impact, Flame retardant plastic, UL 94V-0
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
Category 6 High Density Shielded Patch Panel [UC-PNL6-HS]
Description
UNICOM’s Category 6 Patch Panel is designed for users that demand the Category 6 network systems like Gigabit Ethernet. Choosing a cabling infrastructure performance that can meet tomorrow’s high speed applications is very important. Category 6 Patch Panel also features reduced attenuation, pair to pair NEXT margin over Category 6 standard is comprised of EIA/ TIA-568-A, EIA/TIA 568-B and ANSI/TIA-568-C.2 standard. 24 Ports 0.5U & 48 Ports 1U as high density design makes it the best choice for data center applications. The PCB design provides a high performance inter-connection link. Each PCB installed on a special tray for less punching & maintenance time. Port’s number silk print is easy for identification and maintenance.
A rear cable management tray with purposely designed cable tie positions, is supplied with each panel which is fitted by simply snapping it into place without the need for any tools. This cable management tray is a good support bar which is capable of fixing cables in a substantially horizontal position even when supporting a large number of network cables, so it helps to have secured termination to the patch panel. It also allows the users to maintain a proper bend radius of horizontal cables.
Features
• Meets EIA/TIA 568-B.2-1 Category 6 S-FTP standards for transmission up to 250 MHz
• Meets ISO 11801 class E
• High density design for data center usage
• Protection from external radiated noise
• Supply with ground lug & ground wire
• Supply with Cable management tray/support bar
• Port number identification
• High performance by aid of PCB inter-connection link
• Special Tray for easy access to PCB and connection points
• Insertion/Extraction Life: 750 Cycles Minimum
• Backward compatible to Category 3, 5 and 5e
• UL Listed
Specifications
• Plate Material: Galvanized Steel
• Color: Silver
• Size: Half U for 24 & 1U for 48 Ports
• Jack Enclosure: High Impact, Flame retardant plastic, UL 94V-0
• Spring Wire: Phosphor Bronze Alloy plated with 50 Micron Gold
• IDC: Phosphor Bronze Alloy plated with 100 Micron 100% Sn Alloy
• IDC Wire Gauge: 22~24 AWG
• Electrical Insulation Resistance: 500 MΩmin. @ 100V DC
High Density Patch Panel [UC-PNL-H]
Description
UNICOM’s High density unloaded Patch Panels are available for mounting of the slim jacks. 24 Ports 0.5U & 48 Ports 1U as high density design makes it the best choice for data center applications. A variety of panel configurations allow a wide choice of field configurable and easy to install horizontal cross connects. Port’s number silk print is easy for identification and maintenance. The rear loading, unloading & punching individual jack helps to install & maintain better than loaded one. Panels are supplied without jacks therefore Jacks can be ordered individually.
A rear cable management tray with purposely designed cable tie positions, is supplied with each panel which is fitted by simply snapping it into place without the need for any tools. This cable management tray is a good support bar which is capable of fixing cables in a substantially horizontal position even when supporting a large number of network cables, so it helps to have secured termination to the patch panel. It also allows the users to maintain a proper bend radius of horizontal cables.
Features
• High density design for data center usage
• Snap-in slim Jacks can be easily fitted into the patch panel
• Supply with Cable management tray/support bar
• Port number identification
• Unused ports can be covered with caps
• Compatible with all category 5e, 6 and 6A non-angled slim jacks
Specifications
• Plate Material: Iron
• Color: Black Powder coating painting
• Size: Half U for 24 & 1U for 48 Ports
• Interface: Optional RJ slim type Jacks
High Density Shielded Patch Panel [UC-PNL-HS]
Description
UNICOM’s High density unloaded Patch Panels is fully shielded to minimize interference and reduce background noise. These Panels are available for mounting of the slim jacks. 24 Ports 0.5U & 48 Ports 1U as high density design makes it the best choice for data center applications. A variety of panel configurations allow a wide choice of field configurable and easy to install horizontal cross connects. Port’s number silk print is easy for identification and maintenance. The rear loading, unloading & punching individual jack helps to install & maintain better than loaded one. Panels are supplied without jacks therefore Jacks can be ordered individually.
A rear cable management tray with purposely designed cable tie positions, is supplied with each panel which is fitted by simply snapping it into place without the need for any tools. This cable management tray is a good support bar which is capable of fixing cables in a substantially horizontal position even when supporting a large number of network cables, so it helps to have secured termination to the patch panel. It also allows the users to maintain a proper bend radius of horizontal cables. The unpainted body is suitable for shielding solutions to protect from external radiated noise in industrial areas.
Features
• High density design for data center usage
• Suitable to protect from external radiated noise
• Snap-in slim Jacks can be easily fitted into the patch panel
• Supply with Cable management tray/support bar
• Port number identification
• Unused ports can be covered with caps
• Compatible with all category 5e, 6 and 6A non-angled slim jacks
Specifications
• Plate Material: Galvanized Steel
• Color: Silver
• Size: Half U for 24 & 1U for 48 Ports
• Interface: Optional RJ slim type Jacks
Angled Patch Panel [UC-PNL-A]
Description
UNICOM’s Angled Patch Panels are designed to increase the available space between the front of the patch panel and cabinet doors. The angled port positions eliminate the need for an additional cable management panel, while maintaining optimised patch cord bend radius. Port’s number silk print is easy for identification and maintenance. The rear loading, unloading & punching individual jack helps to install & maintain better than loaded one. Panels are supplied without jacks therefore angled Jacks can be ordered individually. A rear cable management tray with purposely designed cable tie positions, is supplied with each panel which is fitted by simply snapping it into place without the need for any tools. This cable management tray is a good support bar which is capable of fixing cables in a substantially horizontal position even when supporting a large number of network cables, so it helps to have secured termination to the patch panel. It also allows the users to maintain a proper bend radius of horizontal cables.
Features
• Angled design to eliminate the need for an additional cable management panel
• Reduce the patch cord bend radius
• Snap-in Angled Jacks can be easily fitted into the patch panel
• Supply with Cable management tray/support bar
• Port number identification
• Compatible with all category 5e, 6 and 6A angled jacks
Specifications
• Plate Material: Iron
• Color: Black Powder coating painting
• Size: 1U for 24 Ports
• Interface: Optional RJ angled type Jacks
Angled Shielded Patch Panel [UC-PNL-AS]
Description
UNICOM’s Angled shielded Patch Panels are designed to increase the available space between the front of the patch panel and cabinet doors. The angled port positions eliminate the need for an additional cable management panel, while maintaining optimised patch cord bend radius. Port’s number silk print is easy for identification and maintenance. The rear loading, unloading & punching individual jack helps to install & maintain better than loaded one. Panels are supplied without jacks therefore angled Jacks can be ordered individually. A rear cable management tray with purposely designed cable tie positions, is supplied with each panel which is fitted by simply snapping it into place without the need for any tools. This cable management tray is a good support bar which is capable of fixing cables in a substantially horizontal position even when supporting a large number of network cables, so it helps to have secured termination to the patch panel. It also allows the users to maintain a proper bend radius of horizontal cables. The unpainted body (back frame) is suitable for shielding solutions to protect from external radiated noise in industrial areas
Features
• Angled design to eliminate the need for an additional cable management panel
• Reduce the patch cord bend radius
• Suitable to protect from external radiated noise
• Snap-in Angled Jacks can be easily fitted into the patch panel
• Supply with Cable management tray/support bar
• Port number identification
• Compatible with all category 5e, 6 and 6A angled jacks
Specifications
• Plate Material: Galvanized Steel (Back side)
• Color: Black Powder coating painting
• Size: 1U for 24 Ports
• nterface: Optional RJ angled type Jacks
V-Shape Shielded Patch Panel [UC-PNL-VS]
Description
UNICOM’s V-Shape shielded Patch Panel allows standard
keystone jacks to be presented in an angled patch panel
con guration. The patch panel is designed to accept all of
the UNICOM unshielded and shielded standard keystone
jacks from the Category 5e, 6 & 6A portfolios. The V-Shape of
the panel presents the jacks at an angle to the front of the
cabinet that reduces the strain on the jack that results from
the patch lead. The patch lead is naturally routed to the
cabinet/frame cable management reducing the requirement
for rack mounted cable managements. Port’s number silk
print is easy for identi cation and maintenance. The rear
loading, unloading & punching individual jack helps to install &
maintain better than loaded one. Panels are supplied without
jacks therefore Jacks must be ordered individually. A rear
cable management tray with purposely designed cable tie
positions, is supplied with each panel which is tted by simply
snapping it into place without the need for any tools. This cable
management tray is a good support bar which is capable of
xing cables in a substantially horizontal position even when
supporting a large number of network cables, so it helps to
have secured termination to the patch panel. It also allows the
users to maintain a proper bend radius of horizontal cables. The unpainted body (back frame) is suitable for shielding solutions to protect from external radiated noise in industrial areas.
Features
• V-Shape design to eliminate the need for an additional cable management panel
• Reduce the patch cord bend radius
• Suitable to protect from external radiated noise
• Snap-in Angled Jacks can be easily fitted into the patch panel
• Supply with Cable management tray/support bar
• Port number identification
• Compatible with all category 5e, 6 and 6A jacks
Specifications
• Plate Material: Galvanized Steel (Back side)
• Color: Black Powder coating painting
• Size: 1U for 24 Portsinterface: Optional standard RJ Jacks
Modular Patch Panel [UC-PNL-M]
Description
UNICOM’s Modular Patch Panel accepts either and/or both copper and fiber modules. The ability to have fiber and copper presented in one panel offers flexibility in the installation, reduces required rack space and provides future proofing in system design. The cassettes are available for Cat-6a, LC & SC fibers. This line of cassettes expands UNICOM’s solutions to support a wide range of applications and protocols in high-density telecom and data center environments. With UNICOM’s modular cassette solution, all cabling and components are standard and readily available. When changes to network equipment occur, the design can be modified or upgraded simply by swapping out or adding cassettes to suit the user’s needs.
A rear cable management tray with purposely designed cable tie positions, is supplied with each panel which is fitted by simply snapping it into place without the need for any tools. This cable management tray is a good support bar which is capable of fixing cables in a substantially horizontal position even when supporting a large number of network cables, so it helps to have secured termination to the patch panel. It also allows the users to maintain a proper bend radius of horizontal cables.
Features
• High density design for data center usage
• Flexible for mixing copper & fiber solutions
• Easy for upgrading & modifying
• Snap-in modules can be easily fitted into the patch panel
• Supply with Cable management tray/support bar
• Slot number identification
• Unused slots can be covered with blank
Specifications
• Plate Material: Iron
• Color: Black Powder coating painting
• Size: 1U with 8 empty slots to support up to 48 Ports
• Interface: Optional RJ-45 CAT-6A, LC Fiber & SC Fiber module
Intelligent Patch Panel [UC-PNL-I]
Description
UNICOM’s Intelligent Patch Panel is an ideal solution to manage the network infrastructure. The panel features onboard intelligence to guide technicians and can be used to display connectivity diagnostic information. The network troubleshooting is now easier by Multiple color LEDs, also the real time alert can drastically reduce downtime and increase productivity. The UNICOM Intelligent patch panels enable the IT staff to set up information for cabling, such as the planning of telecommunication spaces and rack systems, and the management of cabling equipment, work area and channel. Installer will save more time to install and replace panels and modules. The revolutionary replaceable LED & MCU modules allow the technicians to replace modules without unloading other structured cabling components. The simplicity of the system design enables users to save costs in training, cabling management and maintenance.
UNICOM’s Intelligent Patch Panel accepts either both copper and fiber cassette/Modular Jacks. The cassettes are available for both LC & SC fibers. When changes to network equipment occur, the design can be modified or upgraded simply by swapping out or adding cassettes to suit the user’s needs.
Features
• Meets ANSI/TIA/EIA-606-A, Class 4
• Intelligent control on passive communications
• Easy structured cabling planning, cross-connection guide
• Monitoring the Panel system connection
• Real time alert for any unauthorized activity
• Multiple color of LED indicator
• Automatic create work area database from AutoCAD file
• Each Master Control Unit (MCU) can control up to 19 Distribution Control Units (DCU)
• Hot Plug MCU & LED Modules
• Webpage supervised & remote control the system via internet
• The software could be customized
• Supports both Copper and Fiber applications
• Snap-in modules can be easily fitted into the patch panel
• LC & SC MPO could be installed on the same panel
• Slot number identification
• Unused slots can be covered with blank
Specifications
• Plate Material: Iron
• Color: Black Powder coating painting
• Size: 1U with 8 empty slots to support up to 48 Ports
• Interface: Optional RJ-45 CAT-6A, LC Fiber & SC Fiber
module